tr
en
Education Content
  1. Home Page
  2. Education Content

Education Content

In the training to be given, PLC and touch panel programming will be given practically with mechatronic sets using the most commonly used auxiliary arguments in all sectors in the market. The aim is to teach the participant technical personnel the information that they can learn with difficulties in the market in a few years with specific and understandable stages, and to ensure that the person starts at a level that can work directly and produce work in the enterprise where he / she will work or be an intern.

The scope of training is summarized as follows;

  • Automation instruments training
  • Physical connection and fault detection methods of PLC and automation panels
  • Basic Automation control circuits and application on PLC & HMI panel
  • Basic Automation products training and motor driving, starting techniques
  • Siemens TIA PORTAL, Schneider VIJEO DESIGNER and Schneider CODESYS software PLC and HMI touch panel software trainings with editors
  • Applied process automation training with different scenarios on mechatronic sets

 

TRAINING PLACE
Ostim Prestige Business Center-ANKARA

Technopark Training Hall-GAZIANTEP

Level 1
Level 1
Level 1
Level 1
Level 1
Level 1

Lesson-1 Automation instruments training;

  • Basic electricity, control training
  • Types of sensors (inductive sensors, capacitive sensors, reflection sensors, rope break sensors, ultrasonic sensors, magnetic sensors, etc.)
  • Switches and buttons
  • Lamps
  • Contactors and relays
  • Temperature sensor types
  • Power supply, thermal magnetic switch, pako switch and fuses
  • Techniques of using measuring instruments in automation panels and selection criteria of fault detection
  • The concept of open and closed contacts connected to the circuit by the trainee
  • Sealing and control circuit with circuit connection realized by the trainee
Level 2
Level 2
Level 2
Level 2
Level 2
Level 2

Hands-on Project Software with CODESYS and VIJEO DESIGNER software editors;
Lesson-1 Quadrant Intersection Traffic Light Project

  • Creating the required Input and Output addresses in the PLC
  • Creating the addresses created in PLC in HMI
  • Design of the traffic lights required for the project in HMI
  • Create a ladder diagram for the program
  • Construction of physical connections for 1 intersection within the project

Lecture-2 Disinfectant Unit Project

  • Creating the required Input and Output addresses in the PLC
  • Creating the addresses created in PLC in HMI
  • Making the design required for the project in HMI
  • Creating a ladder diagram in PLC
  • Making the physical connections required for the project

Lesson-3 Star Triangle Pathing Project

  • Creating the required Input and Output addresses in the PLC
  • Creating the addresses created in PLC in HMI
  • Creating a ladder program for the project
  • Making the necessary physical circuit connections
  • Control of motor operation information via touch screen
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3

Mechatronic sets with CODESYS and VIJEO DESIGNER software editors
Lesson-1 Mechatronic Band Product Classification Set;

  • Classification of moving objects on the belt using photocells and pneumatic cylinders
  • Driving and controlling the motor using analog module and inverter with the help of PLC via HMI
  • Realization of PLC and HMI process software within a specific scenario

Lesson-2 Mechatronic Band Gripper Arm Product Transportation Set;

  • Product transportation with pneumatic gripper arm on the set Separation of products on the belt and realization of PLC and HMI process software
  • Driving and controlling the motor using analog module and inverter with the help of PLC via HMI

Lesson-3 Pneumatic Cylinder Control Set;

  • Activating 10 cylinders in the set within certain scenarios
  • Monitoring and configuring the active pneumatic cylinder information on the HMI Lesson-4 PID Control System Set;
  • Explanation of PID control logic
  • Data processing using analog modules Heater control with SSR (Solid State Relay) relay
  • Temperature measurement and control using PT100
  • Control of the created program in HMI
Level 4
Level 4
Level 4
Level 4
Level 4
Level 4

Mechatronic sets with SIEMENS TIAPORTAL software editors
Lesson-1 Product Routing Kit with Color Sensor;

  • Profinet communication protocol
  • Guiding a pneumatic system with a color sensor,
  • Realization of automation software in PLC and HMI panel within a specific scenario

Lesson-2 Encoder Position Control Set;

  • Profinet communication protocol
  • Encoder Position Control, (Elevator automation using asynchronous motor and inverter)
  • Explaining fast counter logic with encoder
  • Processing analog data with PLC and HMI
  • Realization of automation software in PLC and HMI panel within a specific scenario
Level 5
Level 5
Level 5
Level 5

Special set with CODESYS and VIJEO DESIGNER software editors;

  • Digital module, analog module, ethernet switch module introductions
  • Stepper motor control with stepper motor drivers
  • Servo motor control with servo motor drives
  • CanOpen communication
  • Screen design and control with industrial PC
  • Pneumatic compressed air system and cylinder control with valves
  • Product transportation with stepper motor and gripper pneumatic cylinders
  • Conveyor belt operation with stepper motor
  • Product transportation with servo motor and vacuum pneumatic conveyor systems
  • Classification of products according to their weight with loadcell, converter and weighing unit
  • Product placement with the help of asynchronous motor and rotary table
WhatsApp Support